M-ONE Hochtemperatursilikon is a high-temperature silicone with a high temperature resistance from -60 ° C to + 260 ° C (at short intervals up to + 300 ° C). It is specially used for sealing of parts that are affected by high temperatures especially in automobile construction but also for stoves, fireplaces, heating installations and numerous other technical applications. Adheres well to glass, porcelain, stainless steel . After use, the silicone cures with air moisture to form an elastic sealant.
HIGH TEMPERATURE SILICONE
M-ONE Hochleistungs-Rostlöser is a fast acting spray that releases rusted screws, nuts and joints. Also ideal for use as a lubricant, contact spray and corrosion protection. Lubricates reliably, protects against corrosion, displaces moisture and stops squeaking noises. Contains MoS2.
RUST SOLVENT SPRAY
M-ONE MOTOR STARTER makes it easier to start benzin and diesel engines. It is used in cars, trucks and engines of all kinds (chainsaws, lawn mowers, construction site generators, etc). The product is quick and reliable, has a low flash point and has a lubricant additive that helps engines start in cold and wet weather. Application: Spray directly on the air filter and start the engine immediately. With the help of a second person, the start is facilitated because it can be sprayed already during the ignition process.
MOTORSTARTER
M-ONE FETTSPRAY is a transparent high-performance grease, ideal for lubricating roller and ball bearings, gear and worm gears, all types of joints and couplings. Even in inaccessible places, M-ONE FETTSPRAY penetrates very well due to its excellent creep properties. Also well suited for door locks, door hinges, slide rails, brake rods, bellcranks, etc. Chains and wire ropes can be treated very well with M-ONE FETTSPRAY and have sufficient slip and rust protection after treatment.
FETTSPRAY
M-ONE UBS Spray is a bitumen-free underbody protection based on rubber resin. After drying, the coating results in a permanently elastic, strong adhesive coating with high abrasion resistance. M-ONE UBS Spray reliably protects against stone and corrosion. After it has dried completely, the underbody protection can be painted over. Application: Optimal processing temperature + 16° C to + 25° C. Shake the can at least 2 minutes from the audible stop of the mixing balls. The parts to be treated must be clean, dry and free from grease, oil and rust. Can be painted over after approx. 8 hours with commercially available paints.
UNTERBODENSCHUTZ UBS SPRAY 
M-ONE BREMSEN & PARTS CLEANER is a highly active special cleaning agent with an intensive cleaning ef fect for oily and greasy machine parts, disc brakes and brake parts. Reduces noise and works residue-free, is non-corrosive and does not attack rubber and plastic parts. Application: Spray on the contaminated surface at a distance of approx. 20 cm and allow to drain. Work the parts with a dry cloth. For heavy soiling treat several times.
BRAKES & PARTS CLEANER
M-ONE hand washing paste is an ideal product made from wood flour and skin protection agents that is used for thorough cleaning of the hands. It ensures perfect, skin-friendly cleaning, even when it is contaminated by oils and fats.
HAND WASH PASTE
S E R V I C E
With our M-ONE service products, we have made it our misson to put together a product range that consists of a number of mutually complementary products, with which our partners and customers have the best tools at hand to clean their machines and vehicles quickly and thoroughly and to be maintained. In order to meet our high standards, the individual products are continuously adapted to the latest technology and the range of our service products expanded in order to provide our partners and customers with the best possible quality products with an optimal price-performance ratio in the future.
Service products
info@m-one.com
Am Atzelberg 3a 64521 Groß-Gerau Deutschland
+4993039848112
Veternik Z. Indrustriale 10000 Prishtinë Kosovë
M-ONE Hochtemperatursilikon is a high-temperature silicone with a high temperature resistance from -60 ° C to + 260 ° C (at short intervals up to + 300 ° C). It is specially used for sealing of parts that are affected by high temperatures especially in automobile construction but also for stoves, fireplaces, heating installations and numerous other technical applications. Adheres well to glass, porcelain, stainless steel . After use, the silicone cures with air moisture to form an elastic sealant.
HIGH TEMPERATURE SILICONE
M-ONE Hochleistungs-Rostlöser is a fast acting spray that releases rusted screws, nuts and joints. Also ideal for use as a lubricant, contact spray and corrosion protection. Lubricates reliably, protects against corrosion, displaces moisture and stops squeaking noises. Contains MoS2.
RUST SOLVENT SPRAY
M-ONE MOTOR STARTER makes it easier to start benzin and diesel engines. It is used in cars, trucks and engines of all kinds (chainsaws, lawn mowers, construction site generators, etc). The product is quick and reliable, has a low flash point and has a lubricant additive that helps engines start in cold and wet weather. Application: Spray directly on the air filter and start the engine immediately. With the help of a second person, the start is facilitated because it can be sprayed already during the ignition process.
MOTORSTARTER
M-ONE FETTSPRAY is a transparent high-performance grease, ideal for lubricating roller and ball bearings, gear and worm gears, all types of joints and couplings. Even in inaccessible places, M-ONE FETTSPRAY penetrates very well due to its excellent creep properties. Also well suited for door locks, door hinges, slide rails, brake rods, bellcranks, etc. Chains and wire ropes can be treated very well with M-ONE FETTSPRAY and have sufficient slip and rust protection after treatment.
FETTSPRAY
M-ONE UBS Spray is a bitumen-free underbody protection based on rubber resin. After drying, the coating results in a permanently elastic, strong adhesive coating with high abrasion resistance. M-ONE UBS Spray reliably protects against stone and corrosion. After it has dried completely, the underbody protection can be painted over. Application: Optimal processing temperature + 16° C to + 25° C. Shake the can at least 2 minutes from the audible stop of the mixing balls. The parts to be treated must be clean, dry and free from grease, oil and rust. Can be painted over after approx. 8 hours with commercially available paints.
UNTERBODENSCHUTZ UBS SPRAY
M-ONE BREMSENREINIGER IST DER IDEALE REINIGER für den Einsatz in der Industrie und im Handwerk, er wird bei der Reparatur und Montage von verölten fettigen Maschinenteilen benutzt. Durch den hohen Wirkstoffanteil wird eine intensive und schnellwirkende Reinigung erreicht. Reduziert Geräusche und arbeitet rückstandsfrei, ist nicht korrosiv und greift Gummi- und Kunststoffteile nicht an. Ideal zur Verwendung an Bremsen, Kupplungen, Motorteilen usw. Anwendung: Im Abstand von ca. 20 cm auf die verunreinigte Fläche aufsprühen und ablaufen lassen. Die Teile mit einem trockenen Lappen bearbeiten. Bei starken Verschmutzungen mehrmals behandeln.
BRAKES & PARTS CLEANER
M-ONE hand washing paste is an ideal product made from wood flour and skin protection agents that is used for thorough cleaning of the hands. It ensures perfect, skin-friendly cleaning, even when it is contaminated by oils and fats.
HAND WASH PASTE
With our M-ONE service products, we have made it our misson to put together a product range that consists of a number of mutually complementary products, with which our partners and customers have the best tools at hand to clean their machines and vehicles quickly and thoroughly and to be maintained. In order to meet our high standards, the individual products are continuously adapted to the latest technology and the range of our service products expanded in order to provide our partners and customers with the best possible quality products with an optimal price-performance ratio in the future.
Service products
S E R V I C E
info@m-one.com
Am Atzelberg 3a 64521 Groß-Gerau Deutschland
+4993039848112
Veternik Z. Indrustriale 10000 Prishtinë Kosovë
M-ONE Hochtemperatursilikon is a high-temperature silicone with a high temperature resistance from -60 ° C to + 260 ° C (at short intervals up to + 300 ° C). It is specially used for sealing of parts that are affected by high temperatures especially in automobile construction but also for stoves, fireplaces, heating installations and numerous other technical applications. Adheres well to glass, porcelain, stainless steel . After use, the silicone cures with air moisture to form an elastic sealant.
HIGH TEMPERATURE SILICONE
M-ONE Hochleistungs-Rostlöser is a fast acting spray that releases rusted screws, nuts and joints. Also ideal for use as a lubricant, contact spray and corrosion protection. Lubricates reliably, protects against corrosion, displaces moisture and stops squeaking noises. Contains MoS2.
RUST SOLVENT SPRAY
M-ONE MOTOR STARTER makes it easier to start benzin and diesel engines. It is used in cars, trucks and engines of all kinds (chainsaws, lawn mowers, construction site generators, etc). The product is quick and reliable, has a low flash point and has a lubricant additive that helps engines start in cold and wet weather. Application: Spray directly on the air filter and start the engine immediately. With the help of a second person, the start is facilitated because it can be sprayed already during the ignition process.
MOTORSTARTER
M-ONE FETTSPRAY is a transparent high-performance grease, ideal for lubricating roller and ball bearings, gear and worm gears, all types of joints and couplings. Even in inaccessible places, M-ONE FETTSPRAY penetrates very well due to its excellent creep properties. Also well suited for door locks, door hinges, slide rails, brake rods, bellcranks, etc. Chains and wire ropes can be treated very well with M-ONE FETTSPRAY and have sufficient slip and rust protection after treatment.
FETTSPRAY
M-ONE UBS Spray is a bitumen-free underbody protection based on rubber resin. After drying, the coating results in a permanently elastic, strong adhesive coating with high abrasion resistance. M-ONE UBS Spray reliably protects against stone and corrosion. After it has dried completely, the underbody protection can be painted over. Application: Optimal processing temperature + 16° C to + 25° C. Shake the can at least 2 minutes from the audible stop of the mixing balls. The parts to be treated must be clean, dry and free from grease, oil and rust. Can be painted over after approx. 8 hours with commercially available paints.
UNTERBODENSCHUTZ UBS SPRAY
M-ONE BREMSENREINIGER IST DER IDEALE REINIGER für den Einsatz in der Industrie und im Handwerk, er wird bei der Reparatur und Montage von verölten fettigen Maschinenteilen benutzt. Durch den hohen Wirkstoffanteil wird eine intensive und schnellwirkende Reinigung erreicht. Reduziert Geräusche und arbeitet rückstandsfrei, ist nicht korrosiv und greift Gummi- und Kunststoffteile nicht an. Ideal zur Verwendung an Bremsen, Kupplungen, Motorteilen usw. Anwendung: Im Abstand von ca. 20 cm auf die verunreinigte Fläche aufsprühen und ablaufen lassen. Die Teile mit einem trockenen Lappen bearbeiten. Bei starken Verschmutzungen mehrmals behandeln.
BRAKES & PARTS CLEANER
M-ONE hand washing paste is an ideal product made from wood flour and skin protection agents that is used for thorough cleaning of the hands. It ensures perfect, skin-friendly cleaning, even when it is contaminated by oils and fats.
HAND WASH PASTE
With our M-ONE service products, we have made it our misson to put together a product range that consists of a number of mutually complementary products, with which our partners and customers have the best tools at hand to clean their machines and vehicles quickly and thoroughly and to be maintained. In order to meet our high standards, the individual products are continuously adapted to the latest technology and the range of our service products expanded in order to provide our partners and customers with the best possible quality products with an optimal price-performance ratio in the future.
Service products
S E R V I C E
info@m-one.com
Am Atzelberg 3a 64521 Groß-Gerau Deutschland
+4993039848112
Veternik Z. Indrustriale 10000 Prishtinë Kosovë